WOCA | INVISIBLE OIL SYSTEM BUNDLE

Achieve the look of freshly sanded, untreated timber while providing durable, water-resistant protection. This complete three-step system is designed especially for light-coloured timber floors, leaving the wood with an ultra-matt, natural appearance and a soft, breathable feel.

This Bundle Includes

• 1 × 2.5L WOCA Invisible Oil Primer – Natural
• 1 × 2.5L WOCA Invisible Oil – Natural
• 1 × 1L WOCA Invisible Oil Care – Natural

Coverage

• Primer: 20-30m² / 2.5L
• Invisible Oil: 75-100m² / 2.5L
• Care: 30-40m² / 1L

Key Benefits

• Maintains the timber’s natural, freshly sanded appearance
• Provides resistance against water, coffee, tea and red wine
• Creates a breathable, soft-feel surface
• Complete three-step treatment system
• Easy to clean and maintain

Recommended Application

1. Prepare the timber
   Sand the timber surface thoroughly and remove all sanding dust. The floor must be clean, dry and free from grease or residue. Damp mop the wood with WOCA Intensive Wood Cleaner and leave the floor to dry for at least 8 hours before application of the Invisible Primer.
2. Apply Invisible Oil Primer
   Apply the primer using a short-bristle paint roller in an even coat. Work in small areas of no more than 20m² at a time. Leave the primer to soak in for up to 5 minutes. Polish the primer into the wood with a red floor pad attached to a floor machine until the floor appears saturated. Remove excess primer with dry, lint-free cotton cloths or pads attached to the polishing machine until the surface no longer appears wet. Leave the floor to dry for 3-4 hours, before applying the Invisible Oil, polish the dry surface using a maroon pad and vacuum thoroughly.
3. Apply Invisible Oil
   Apply an even coat with a short-bristle paint roller, working in areas of no more than 20m² at a time. Allow the oil to penetrate for approximately 5 minutes, applying more if the timber absorbs it quickly. Polish the oil into the wood with a red floor pad attached to a floor machine until the floor appears saturated. Wipe the excess oil on the surface thoroughly with a lint-free cotton cloths until it no longer appears wet. Leave to dry for 24 hours.
4. Apply Invisible Oil Care
   After 24 hours, apply a thin, even coat of Invisible Oil Care. Working in small sections, less than 20m² at a time, pour the oil directly onto the floor immediately polish in with a white floor pad attached to a floor machine until the floor appears saturated. Remove excess oil with dry, lint-free cotton cloths or pads attached to the polishing machine until the surface no longer appears wet.

The floor may be used carefully after 24 hours. Avoid water and other liquids during the curing period, the Invisible Oil layer is fully hardened after approximately 7 days under normal indoor conditions.

For ongoing cleaning, use WOCA Natural Soap White for weekly cleaning and Oil Refreshing Soap White for monthly cleaning to help preserve the floor’s light, natural appearance.